Best Door Pocket Liners for the Model Y and Model 3

Door pocket liners are molded trays that drop into the bare plastic bins in your doors so that everything in the bin comes out with the tray. If you have a Model 3 Highland, buy the BASENOR four-piece set - it is the cheapest one we could verify as in stock and the only one that explicitly shapes the rear pieces around the manual door release. If you have a 2025-on Model Y Juniper, the Teslarati set is the best-looking option that was actually available to buy.

This is a small purchase that solves a specific irritation. Tesla door pockets are deep, unlined, slightly ribbed plastic. Crumbs sit in the ribs. A leaking hand sanitizer bottle becomes a job with a cloth and a torch. There is no way to tip the pocket out, because the pocket is part of the door. A liner turns all of that into lifting a tray, emptying it and dropping it back.

What a liner is, and what it is not

The useful distinction in this category is between a liner and an organizer, and the listings use both words for both things. A liner is a single molded tray per pocket. It protects the plastic and lifts out. An organizer is a liner with partitions in it - it also decides where things go, which is either the point or an annoyance depending on what you carry.

• Look at the side-on photo. A liner follows the full depth of the pocket; a flat insert covers the bottom and leaves the walls exposed, which is where most of the scuffing happens.
• Check whether the lip is wrapped. An unwrapped liner leaves the visible top edge of the pocket bare, and that edge is what you drag a bag across getting out of the car.
• Count the pieces. Four means all four doors. Five usually means four doors plus a cup holder liner. Two means front doors only, and the back doors are where the children are.
• On a Model 3 or Model Y, check the rear-door cutout. Rear doors have a manual release, and a liner that covers it is covering a control someone may need in a hurry.
• Check the generation, not the model. The Juniper, the Highland and the pre-refresh cars have differently shaped pockets.

How we chose

We have not fitted these sets ourselves and do not claim to have. These are the criteria we could check against the brands' own listings, in the order we weighted them:

1. Availability, checked on the day of writing. This category is full of sold-out listings and we did not give a pick to anything we could not confirm was orderable.
2. Correct rear-door geometry, including the manual-release cutout where the car has one.
3. Piece count against the number of pockets in the car, so the set covers the doors rather than two of them.
4. Depth and edge coverage - a tray that follows the walls rather than lying in the bottom.
5. Published material. TPE or thermoplastic rubber from the brand's own description, never inferred from a photograph.
6. Price per pocket, not price per box.

Quick picks

#	Product	Best for	Score	Price
1	BASENOR door storage box (Model 3 Highland) The default for a Highland. Correct cutouts, trivial install, lowest price of anything we could verify as in stock.	Best overall (Model 3 Highland)	9.0★★★★★	Check price on Amazon → #ad disclosure
2	Model Y door pocket storage organizers The nicest-looking Model Y set, if the generation you need happens to be in stock.	Best for the Model Y Juniper	8.7★★★★★	Check price on Amazon → #ad disclosure
3	Tesery door pocket liners (Model Y Juniper) Pay the premium only if the exposed pocket lip is the thing bothering you.	Best finish	8.5★★★★★	Check price on Amazon → #ad disclosure
4	Door storage protection inserts (Model 3 up to 2023) The answer for a pre-Highland Model 3, with the caveat that you may have to wait for stock.	Best for a 2017-2023 Model 3	8.6★★★★★	Check price on Amazon → #ad disclosure

Scores are our editorial assessment of fitment scope, published materials and coverage. They are not lab measurements and we have not tested these products.

1. Best overall (Model 3 Highland)

BASENOR door storage box (Model 3 Highland)

BASENOR

Four pieces, drops in with no tools, and the rear pieces are shaped around the manual door release - the detail generic inserts get wrong, and the one that matters because covering that control is not a cosmetic mistake. Cheapest set we could verify as in stock. The compartment partitions decide how you use the pocket, which not everyone will want.

Best for: Model 3 Highland owners who want all four door pockets lined for the price of a tank of charge

Fits: Model 3 Highland (2024-2026)

Fit9.0

Coverage9.0

Durability8.0

Install9.5

Value9.5

Overall9.0/ 10 — our editorial score, not a lab test

What works

• The rear-door cutout for the manual release is the detail most generic inserts get wrong, and getting it wrong means covering a control you may need
• Drops in with no tools or adhesive, and lifts straight out to empty
• Cheapest verified set here by a wide margin

What does not

• Partitions decide how you use the pocket — if you carry one tall bottle rather than several small things, they get in the way
• Highland only; the 2017-2023 door pocket is a different shape

Manufacturer specifications

• Four pieces: both front and both rear door pockets
• TPE, described by the brand as waterproof and all-weather
• Partitioned compartments, molded to the Highland door pocket shape
• Brand states the rear pieces include a protective flap around the manual door release
• Listed for 2024-2026 Highland standard, Premium and Performance

Specifications as published by the manufacturer. We have not independently tested this product.

Check price on Amazon →

#ad disclosure

Specification sources: BASENOR Model 3 Highland door storage box, TPE, four pieces

2. Best for the Model Y Juniper

Model Y door pocket storage organizers

Teslarati

The closest of these to the molded liner Tesla sells itself: soft TPE, factory-looking finish, and quiet against keys and cables. Only the 2026 Juniper fitment was in stock when we checked - the 2021-2025 sets were sold out, which is a recurring pattern with this product rather than a one-off.

Best for: Juniper owners who want a factory-looking liner in all four doors

Fits: Model Y Juniper (2025-2026)

Fit9.0

Coverage9.0

Durability8.5

Install9.5

Value7.5

Overall8.7/ 10 — our editorial score, not a lab test

What works

• The OEM-look finish is the closest of these sets to the molded liner Tesla sells itself
• Soft surface deadens the rattle of keys and cables against bare plastic

What does not

• At the time of writing only the 2026 Juniper fitment was in stock — the 2021-2025 versions were sold out, and this set has a history of going out of stock by generation
• Full retail is high for four pieces of molded TPE; it is worth buying on one of the seller's discounts

Manufacturer specifications

• Complete set covering all four door pockets
• Thermoplastic elastomer, described by the seller as having a soft rubber-like surface
• Sold per Model Y generation, with the 2026 Juniper part listed separately from the older cars

Specifications as published by the manufacturer. We have not independently tested this product.

Check price on Amazon →

#ad disclosure

Specification sources: Model Y door pocket storage organizers, TPE complete set

3. Best finish

Tesery door pocket liners (Model Y Juniper)

Tesery

Full TPE edging that wraps the visible lip of the pocket rather than stopping at the bottom of it, which is the difference between a liner that disappears and a tray sitting in a door. Roughly double the cheapest four-piece set for the same four pockets, and the listing publishes no thickness or warranty.

Best for: A Juniper owner who wants the liner edges to disappear into the door trim

Fits: Model Y Juniper (2025-2026)

Fit9.0

Coverage9.0

Durability8.0

Install9.5

Value7.0

Overall8.5/ 10 — our editorial score, not a lab test

What works

• Wrapping the pocket lip is what stops the liner reading as an aftermarket tray dropped into the door
• Covers the edge that actually gets scuffed, which flat-bottom inserts leave exposed

What does not

• Roughly double the price of the cheapest verified four-piece set, for the same four pockets
• No published material thickness or warranty detail on the listing

Manufacturer specifications

• Four pieces for the Model Y Juniper door pockets
• Brand describes a full TPE edging design that wraps the visible lip of the pocket
• Listed for the Juniper generation only

Specifications as published by the manufacturer. We have not independently tested this product.

Check price on Amazon →

#ad disclosure

Specification sources: Tesery door pocket liners for the Model Y Juniper, four pieces

4. Best for a 2017-2023 Model 3

Door storage protection inserts (Model 3 up to 2023)

EVANNEX

Most brands have quietly dropped the pre-Highland door pocket, and this was the four-piece set we could still verify as orderable, backed by the seller's lifetime replacement program. Stock is thin - the listing showed only a few left and offers a waitlist - so buy it when you see it rather than when you need it.

Best for: The 2017-2023 Model 3, which almost nobody still makes door liners for

Fits: Model 3 (2017-2023)

Fit8.5

Coverage9.0

Durability8.0

Install9.5

Value8.0

Overall8.6/ 10 — our editorial score, not a lab test

What works

• The pre-Highland door pocket has quietly been dropped by most brands, and this is the set we could verify as still orderable
• No tools, no adhesive — the inserts sit in the contour of the pocket

What does not

• Stock runs thin: the listing showed only a few left and offers a waitlist, so it can be unavailable when you look
• Does not fit a Highland, and the listings for the two generations look almost identical at a glance

Manufacturer specifications

• Set of four, one per door pocket
• Thermoplastic rubber, described by the seller as strong and pliable
• Explicitly listed as fitting the Model 3 up to 2023 and NOT the 2024-on Highland
• Covered by the seller's lifetime replacement program

Specifications as published by the manufacturer. We have not independently tested this product.

Check price on Amazon →

#ad disclosure

Specification sources: EVANNEX door storage protection inserts for the Model 3 up to 2023

Which set fits which car

Two sets that look like obvious candidates are missing from that table on purpose. Abstract Ocean's five-piece Juniper liner set - four doors plus a cup holder liner, in TPE, dishwasher safe on the top shelf per the brand - was sold out when we checked, and the Teslarati Model 3 set for the 2017-2023 car was sold out as well. Both are worth watching if you want more options than the ones above, and neither gets a pick here, because recommending something you cannot buy is not a recommendation.

Do you need one in every door?

The front pockets take the daily carry: phone, cable, sunglasses case, a bottle. They get scuffed rather than dirty. The rear pockets are where food goes, and on a family car they are the ones that actually need a tray you can lift out and rinse. If you are buying for the mess rather than for the look, the rear doors are the ones that justify the purchase, and most of these sets are sold as fours anyway because splitting them makes no sense at this price.

The one real argument for liners in all four is noise. A key fob or a metal water bottle in a bare plastic bin is audible on a bad road surface, and a Tesla cabin is quiet enough that you hear it. TPE deadens that. It is a small thing that you notice for about a week and then never think about again, which is true of most good interior accessories.

Living with them

These are among the easiest accessories in the car to fit: no tools, no adhesive, no trim removal. They drop in, and the reason they stay put is the shape rather than any fixing. That also means a badly shaped one rattles, which is the single most common complaint across this category.

Cleaning is the point of owning them. Lift, empty, wipe, replace. Some brands say their liners are dishwasher-safe on the top shelf; most say nothing, in which case warm water and a cloth is the safe assumption. If you want the same treatment for the rest of the cabin surfaces that collect this sort of mess, cup holder inserts and the under-seat vent covers are the two other bare-plastic traps worth lining, and Model 3 cargo liners and trunk mats does the same job for the three surfaces in the trunk.

Our call

Model 3 Highland: the BASENOR set, without much hesitation. It is the cheapest verified option, it covers all four pockets, and it is the only one of these that publishes the rear-release detail. Model Y Juniper: the Teslarati set if you care how it looks, the Tesery set if you want the pocket lip wrapped and are willing to pay for it.

A 2017-2023 Model 3 or a 2020-2024 Model Y is harder, and the honest answer is that this category is shrinking for older cars. The EVANNEX inserts are the pre-Highland option we could verify, with stock thin enough that waiting is a real risk. For a legacy Model Y, nothing we checked was reliably in stock on the day of writing - and we would rather say that than send you to a listing that is not there.